CORE
Section: Linux Programmer's Manual (5)
Updated: 2010-02-27
NAME
core - core dump file
DESCRIPTION
The default action of certain signals is to cause a process to terminate
and produce a
core dump file,
a disk file containing an image of the process's memory at
the time of termination.
This image can be used in a debugger (e.g.,
gdb(1))
to inspect the state of the program at the time that it terminated.
A list of the signals which cause a process to dump core can be found in
signal(7).
A process can set its soft
RLIMIT_CORE
resource limit to place an upper limit on the size of the core dump file
that will be produced if it receives a "core dump" signal; see
getrlimit(2)
for details.
There are various circumstances in which a core dump file is
not produced:
- *
-
The process does not have permission to write the core file.
(By default the core file is called
core,
and is created in the current working directory.
See below for details on naming.)
Writing the core file will fail if the directory in which
it is to be created is nonwritable,
or if a file with the same name exists and
is not writable
or is not a regular file
(e.g., it is a directory or a symbolic link).
- *
-
A (writable, regular) file with the same name as would be used for the
core dump already exists, but there is more than one hard link to that
file.
- *
-
The file system where the core dump file would be created is full;
or has run out of inodes; or is mounted read-only;
or the user has reached their quota for the file system.
- *
-
The directory in which the core dump file is to be created does
not exist.
- *
-
The
RLIMIT_CORE
(core file size) or
RLIMIT_FSIZE
(file size) resource limits for the process are set to zero; see
getrlimit(2)
and the documentation of the shell's
ulimit
command
(limit
in
csh(1)).
- *
-
The binary being executed by the process does not have read
permission enabled.
- *
-
The process is executing a set-user-ID (set-group-ID) program
that is owned by a user (group) other than the real user (group)
ID of the process.
(However, see the description of the
prctl(2)
PR_SET_DUMPABLE
operation, and the description of the
/proc/sys/fs/suid_dumpable
file in
proc(5).)
Naming of core dump files
By default, a core dump file is named
core,
but the
/proc/sys/kernel/core_pattern
file (since Linux 2.6 and 2.4.21)
can be set to define a template that is used to name core dump files.
The template can contain % specifiers which are substituted
by the following values when a core file is created:
-
- %%
-
a single % character
- %p
-
PID of dumped process
- %u
-
(numeric) real UID of dumped process
- %g
-
(numeric) real GID of dumped process
- %s
-
number of signal causing dump
- %t
-
time of dump, expressed as seconds since the
Epoch, 1970-01-01 00:00:00 +0000 (UTC)
- %h
-
hostname (same as nodename returned by uname(2))
- %e
-
executable filename (without path prefix)
- %c
-
core file size soft resource limit of crashing process (since Linux 2.6.24)
A single % at the end of the template is dropped from the
core filename, as is the combination of a % followed by any
character other than those listed above.
All other characters in the template become a literal
part of the core filename.
The template may include '/' characters, which are interpreted
as delimiters for directory names.
The maximum size of the resulting core filename is 128 bytes (64 bytes
in kernels before 2.6.19).
The default value in this file is "core".
For backward compatibility, if
/proc/sys/kernel/core_pattern
does not include "%p" and
/proc/sys/kernel/core_uses_pid
(see below)
is nonzero, then .PID will be appended to the core filename.
Since version 2.4, Linux has also provided
a more primitive method of controlling
the name of the core dump file.
If the
/proc/sys/kernel/core_uses_pid
file contains the value 0, then a core dump file is simply named
core.
If this file contains a nonzero value, then the core dump file includes
the process ID in a name of the form
core.PID.
Piping core dumps to a program
Since kernel 2.6.19, Linux supports an alternate syntax for the
/proc/sys/kernel/core_pattern
file.
If the first character of this file is a pipe symbol (|),
then the remainder of the line is interpreted as a program to be
executed.
Instead of being written to a disk file, the core dump is given as
standard input to the program.
Note the following points:
- *
-
The program must be specified using an absolute pathname (or a
pathname relative to the root directory, /),
and must immediately follow the '|' character.
- *
-
The process created to run the program runs as user and group
root.
- *
-
Command-line arguments can be supplied to the
program (since kernel 2.6.24),
delimited by white space (up to a total line length of 128 bytes).
- *
-
The command-line arguments can include any of
the % specifiers listed above.
For example, to pass the PID of the process that is being dumped, specify
%p
in an argument.
Controlling which mappings are written to the core dump
Since kernel 2.6.23, the Linux-specific
/proc/PID/coredump_filter
file can be used to control which memory segments are written to the
core dump file in the event that a core dump is performed for the
process with the corresponding process ID.
The value in the file is a bit mask of memory mapping types (see
mmap(2)).
If a bit is set in the mask, then memory mappings of the
corresponding type are dumped; otherwise they are not dumped.
The bits in this file have the following meanings:
-
- bit 0
-
Dump anonymous private mappings.
- bit 1
-
Dump anonymous shared mappings.
- bit 2
-
Dump file-backed private mappings.
- bit 3
-
Dump file-backed shared mappings.
- bit 4 (since Linux 2.6.24)
-
Dump ELF headers.
- bit 5 (since Linux 2.6.28)
-
Dump private huge pages.
- bit 6 (since Linux 2.6.28)
-
Dump shared huge pages.
By default, the following bits are set: 0, 1, 4 (if the
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS
kernel configuration option is enabled), and 5.
The value of this file is displayed in hexadecimal.
(The default value is thus displayed as 33.)
Memory-mapped I/O pages such as frame buffer are never dumped, and
virtual DSO pages are always dumped, regardless of the
coredump_filter
value.
A child process created via
fork(2)
inherits its parent's
coredump_filter
value;
the
coredump_filter
value is preserved across an
execve(2).
It can be useful to set
coredump_filter
in the parent shell before running a program, for example:
$ echo 0x7 > /proc/self/coredump_filter
$ ./some_program
This file is only provided if the kernel was built with the
CONFIG_ELF_CORE
configuration option.
NOTES
The
gdb(1)
gcore
command can be used to obtain a core dump of a running process.
If a multithreaded process (or, more precisely, a process that
shares its memory with another process by being created with the
CLONE_VM
flag of
clone(2))
dumps core, then the process ID is always appended to the core filename,
unless the process ID was already included elsewhere in the
filename via a %p specification in
/proc/sys/kernel/core_pattern.
(This is primarily useful when employing the LinuxThreads implementation,
where each thread of a process has a different PID.)
EXAMPLE
The program below can be used to demonstrate the use of the
pipe syntax in the
/proc/sys/kernel/core_pattern
file.
The following shell session demonstrates the use of this program
(compiled to create an executable named
core_pattern_pipe_test):
$ cc -o core_pattern_pipe_test core_pattern_pipe_test.c
$ su
Password:
# echo '|$PWD/core_pattern_pipe_test %p UID=%u GID=%g sig=%s' > \
/proc/sys/kernel/core_pattern
# exit
$ sleep 100
^\ # type control-backslash
Quit (core dumped)
$ cat core.info
argc=5
argc[0]=</home/mtk/core_pattern_pipe_test>
argc[1]=<20575>
argc[2]=<UID=1000>
argc[3]=<GID=100>
argc[4]=<sig=3>
Total bytes in core dump: 282624
Program source
/* core_pattern_pipe_test.c */
#define _GNU_SOURCE
#include <sys/stat.h>
#include <fcntl.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#define BUF_SIZE 1024
int
main(int argc, char *argv[])
{
int tot, j;
ssize_t nread;
char buf[BUF_SIZE];
FILE *fp;
char cwd[PATH_MAX];
/* Change our current working directory to that of the
crashing process */
snprintf(cwd, PATH_MAX, "/proc/%s/cwd", argv[1]);
chdir(cwd);
/* Write output to file "core.info" in that directory */
fp = fopen("core.info", "w+");
if (fp == NULL)
exit(EXIT_FAILURE);
/* Display command-line arguments given to core_pattern
pipe program */
fprintf(fp, "argc=%d\n", argc);
for (j = 0; j < argc; j++)
fprintf(fp, "argc[%d]=<%s>\n", j, argv[j]);
/* Count bytes in standard input (the core dump) */
tot = 0;
while ((nread = read(STDIN_FILENO, buf, BUF_SIZE)) > 0)
tot += nread;
fprintf(fp, "Total bytes in core dump: %d\n", tot);
exit(EXIT_SUCCESS);
}
SEE ALSO
bash(1),
gdb(1),
getrlimit(2),
mmap(2),
prctl(2),
sigaction(2),
elf(5),
proc(5),
pthreads(7),
signal(7)
COLOPHON
This page is part of release 3.27 of the Linux
man-pages
project.
A description of the project,
and information about reporting bugs,
can be found at
http://www.kernel.org/doc/man-pages/.
Index
- NAME
-
- DESCRIPTION
-
- Naming of core dump files
-
- Piping core dumps to a program
-
- Controlling which mappings are written to the core dump
-
- NOTES
-
- EXAMPLE
-
- Program source
-
- SEE ALSO
-
- COLOPHON
-
This document was created by
man2html,
using the manual pages.
Time: 07:34:59 GMT, March 26, 2013