dpkg-shlibdeps

NAME

SYNOPSIS

DESCRIPTION

dpkg-shlibdeps has two possible sources of information to generate dependency information. Either symbols files or shlibs files. For each binary that dpkg-shlibdeps analyzes, it finds out the list of libraries that it's linked with. Then, for each library, it looks up either the symbols file, or the shlibs file (if the former doesn't exist or if debian/shlibs.local contains the relevant dependency). Both files are supposed to be provided by the library package and should thus be available as /var/lib/dpkg/info/package.symbols or /var/lib/dpkg/info/package.shlibs. The package name is identified in two steps: find the library file on the system (looking in the same directories that ld.so would use), then use dpkg -S library-file to lookup the package providing the library.  

Symbols files

debian/*/DEBIAN/symbols

Shared library information generated by the current build process that also invoked dpkg-shlibdeps. They are generated by dpkg-gensymbols(1). They are only used if the library is found in a package's build tree. The symbols file in that build tree takes precedence over symbols files from other binary packages.

/etc/dpkg/symbols/package.symbols.arch

/etc/dpkg/symbols/package.symbols

Per-system overriding shared library dependency information. arch is the architecture of the current system (obtained by dpkg-architecture -qDEB_HOST_ARCH).

admindir/info/package.symbols

Package-provided shared library dependency information. Unless overridden, admindir is /var/lib/dpkg.

While scanning the symbols used by all binaries, dpkg-shlibdeps remembers the (biggest) minimal version needed for each library. At the end of the process, it is able to write out the minimal dependency for every library used (provided that the information of the symbols files are accurate).

As a safe-guard measure, a symbols file can provide a Build-Depends-Package meta-information field and dpkg-shlibdeps will extract the minimal version required by the corresponding package in the Build-Depends field and use this version if it's higher than the minimal version computed by scanning symbols.  

Shlibs files

The dependencies for a library are looked up in several places. The first file providing information for the library of interest is used:

debian/shlibs.local

Package-local overriding shared library dependency information.

/etc/dpkg/shlibs.override

Per-system overriding shared library dependency information.

debian/*/DEBIAN/shlibs

Shared library information generated by the current build process that also invoked dpkg-shlibdeps. They are only used if the library is found in a package's build tree. The shlibs file in that build tree takes precedence over shlibs files from other binary packages.

admindir/info/package.shlibs

Package-provided shared library dependency information. Unless overridden, admindir is /var/lib/dpkg.

/etc/dpkg/shlibs.default

Per-system default shared library dependency information.

The extracted dependencies are then directly used (except if they are filtered out because they have been identified as duplicate, or as weaker than another dependency).  

OPTIONS

-eexecutable

Include dependencies appropriate for the shared libraries required by executable.

-ddependencyfield

Add dependencies to be added to the control file dependency field dependencyfield. (The dependencies for this field are placed in the variable shlibs:dependencyfield.)

The -ddependencyfield option takes effect for all executables after the option, until the next -ddependencyfield. The default dependencyfield is Depends.

If the same dependency entry (or set of alternatives) appears in more than one of the recognised dependency field names Pre-Depends, Depends, Recommends, Enhances or Suggests then dpkg-shlibdeps will automatically remove the dependency from all fields except the one representing the most important dependencies.

-pvarnameprefix

Start substitution variables with varnameprefix: instead of shlibs:. Likewise, any existing substitution variables starting with varnameprefix: (rather than shlibs:) are removed from the the substitution variables file.

-O

Print substitution variable settings to standard output, rather than being added to the substitution variables file (debian/substvars by default).

-ttype

Prefer shared library dependency information tagged for the given package type. If no tagged information is available, falls back to untagged information. The default package type is "deb". Shared library dependency information is tagged for a given type by prefixing it with the name of the type, a colon, and whitespace.

-Llocalshlibsfile

Read overriding shared library dependency information from localshlibsfile instead of debian/shlibs.local.

-Tsubstvarsfile

Write substitution variables in substvarsfile; the default is debian/substvars.

-v

Enable verbose mode. Numerous messages are displayed to explain what dpkg-shlibdeps does.

-xpackage

Exclude the package from the generated dependencies. This is useful to avoid self-dependencies for packages which provide ELF binaries (executables or library plugins) using a library contained in the same package. This option can be used multiple times to exclude several packages.

-Spkgbuilddir

Look into pkgbuilddir first when trying to find a library. This is useful when the source package builds multiple flavors of the same library and you want to ensure that you get the dependency from a given binary package. You can use this option multiple times: directories will be tried in the same order before directories of other binary packages.

--ignore-missing-info

Do not fail if dependency information can't be found for a shared library. Usage of this option is discouraged, all libraries should provide dependency information (either with shlibs files, or with symbols files) even if they are not yet used by other packages.

--warnings=value

value is a bit field defining the set of warnings that can be emitted by dpkg-shlibdeps. Bit 0 (value=1) enables the warning "symbol sym used by binary found in none of the libraries", bit 1 (value=2) enables the warning "dependency on library could be avoided" and bit 2 (value=4) enables the warning "binary shouldn't be linked with library". The default value is 3: the first two warnings are active by default, the last one is not. Set value to 7 if you want all warnings to be active.

--admindir=dir

Change the location of the dpkg database. The default location is /var/lib/dpkg.

-h, --help

Show the usage message and exit.

--version

Show the version and exit.

WARNINGS

symbol sym used by binary found in none of the libraries.

The indicated symbol has not been found in the libraries linked with the binary. The binary is most likely a library and it needs to be linked with an additional library during the build process (option -llibrary of the linker).

binary contains an unresolvable reference to symbol sym: it's probably a plugin

The indicated symbol has not been found in the libraries linked with the binary. The binary is most likely a plugin and the symbol is probably provided by the program that loads this plugin. In theory a plugin doesn't have any SONAME but this binary does have one and as such it could not be clearly identified as such. However the fact that the binary is stored in a non-public directory is a strong indication that's it's not a normal shared library. If the binary is really a plugin, then disregard this warning. But there's always the possibility that it's a real library and that programs linking to it are using an RPATH so that the dynamic loader finds it. In that case, the library is broken and needs to be fixed.

dependency on library could be avoided if binaries were not uselessly linked against it (they use none of its symbols).

None of the binaries that are linked with library use any of the symbols provided by the library. By fixing all the binaries, you would avoid the dependency associated to this library (unless the same dependency is also generated by another library that is really used).

binary shouldn't be linked with library (it uses none of its symbols).

The binary is linked to a library that it doesn't need. It's not a problem but some small performance improvements in binary load time can be obtained by not linking this library to this binary. This warning checks the same information than the previous one but does it for each binary instead of doing the check globally on all binaries analyzed.

ERRORS

couldn't find library library-soname needed by binary (its RPATH is 'rpath')

The binary uses a library called library-soname but dpkg-shlibdeps has been unable to find the library. dpkg-shlibdeps creates a list of directories to check as following: directories listed in the RPATH of the binary, directories listed in /etc/ld.so.conf, directories listed in the LD_LIBRARY_PATH environment variable, and standard public directories (/lib, /usr/lib, /lib32, /usr/lib32, /lib64, /usr/lib64). Then it checks those directories in the package's build tree of the binary being analyzed, in the packages's build trees indicated with the -S command-line option, in other packages's build trees that contains a DEBIAN/shlibs or DEBIAN/symbols file and finally in the root directory. If the library is not found in any of those directories, then you get this error.

If the library not found is in a private directory of the same package, then you want to add the directory to LD_LIBRARY_PATH. If it's in another binary package being built, you want to make sure that the shlibs/symbols file of this package is already created and that LD_LIBRARY_PATH contains the appropriate directory if it also is in a private directory.

no dependency information found for library-file (used by binary).

The library needed by binary has been found by dpkg-shlibdeps in library-file but dpkg-shlibdeps has been unable to find any dependency information for that library. To find out the dependency, it has tried to map the library to a Debian package with the help of dpkg -S library-file. Then it checked the corresponding shlibs and symbols files in /var/lib/dpkg/info/, and in the various package's build trees (debian/*/DEBIAN/).

This failure can be caused by a bad or missing shlibs or symbols file in the package of the library. It might also happen if the library is built within the same source package and if the shlibs files has not yet been created (in which case you must fix debian/rules to create the shlibs before calling dpkg-shlibdeps). Bad RPATH can also lead to the library being found under a non-canonical name (example: /usr/lib/openoffice.org/../lib/libssl.so.0.9.8 instead of /usr/lib/libssl.so.0.9.8) that's not associated to any package, dpkg-shlibdeps tries to work around this by trying to fallback on a canonical name (using realpath(3)) but it might not always work. It's always best to clean up the RPATH of the binary to avoid problems.

Calling dpkg-shlibdeps in verbose mode (-v) will provide much more information about where it tried to find the dependency information. This might be useful if you don't understand why it's giving you this error.

SEE ALSO

AUTHORS

This is free software; see the GNU General Public Licence version 2 or later for copying conditions. There is NO WARRANTY.

Index

NAME

SYNOPSIS

DESCRIPTION

Symbols files

Shlibs files

OPTIONS

WARNINGS

ERRORS

SEE ALSO

AUTHORS