#include <unistd.h>
extern char **environ;
int execl(const char *path, const char *arg0,
... /*, (char *)0 */);
int execv(const char *path, char *const argv[]);
int execle(const char *path, const char *arg0,
... /*,
(char *)0, char *const envp[]*/);
int execve(const char *path, char *const argv[],
char *const envp[]);
int execlp(const char *file, const char *arg0,
... /*, (char *)0 */);
int execvp(const char *file, char *const argv[]);
The exec family of functions shall replace the current process image with a new process image. The new image shall be constructed from a regular, executable file called the new process image file. There shall be no return from a successful exec, because the calling process image is overlaid by the new process image.
When a C-language program is executed as a result of this call, it shall be entered as a C-language function call as follows:
int main (int argc, char *argv[]);
where argc is the argument count and argv is an array of character pointers to the arguments themselves. In addition, the following variable:
extern char **environ;
is initialized as a pointer to an array of character pointers to the environment strings. The argv and environ arrays are each terminated by a null pointer. The null pointer terminating the argv array is not counted in argc.
Conforming multi-threaded applications shall not use the environ variable to access or modify any environment variable while any other thread is concurrently modifying any environment variable. A call to any function dependent on any environment variable shall be considered a use of the environ variable to access that environment variable.
The arguments specified by a program with one of the exec functions shall be passed on to the new process image in the corresponding main() arguments.
The argument path points to a pathname that identifies the new process image file.
The argument file is used to construct a pathname that identifies the new process image file. If the file argument contains a slash character, the file argument shall be used as the pathname for this file. Otherwise, the path prefix for this file is obtained by a search of the directories passed as the environment variable PATH (see the Base Definitions volume of IEEE Std 1003.1-2001, Chapter 8, Environment Variables). If this environment variable is not present, the results of the search are implementation-defined.
There are two distinct ways in which the contents of the process image file may cause the execution to fail, distinguished by the setting of errno to either [ENOEXEC] or [EINVAL] (see the ERRORS section). In the cases where the other members of the exec family of functions would fail and set errno to [ENOEXEC], the execlp() and execvp() functions shall execute a command interpreter and the environment of the executed command shall be as if the process invoked the sh utility using execl() as follows:
execl(<shell path>, arg0, file, arg1, ..., (char *)0);
where <shell path> is an unspecified pathname for the sh utility, file is the process image file, and for execvp(), where arg0, arg1, and so on correspond to the values passed to execvp() in argv[0], argv[1], and so on.
The arguments represented by arg0,... are pointers to null-terminated character strings. These strings shall constitute the argument list available to the new process image. The list is terminated by a null pointer. The argument arg0 should point to a filename that is associated with the process being started by one of the exec functions.
The argument argv is an array of character pointers to null-terminated strings. The application shall ensure that the last member of this array is a null pointer. These strings shall constitute the argument list available to the new process image. The value in argv[0] should point to a filename that is associated with the process being started by one of the exec functions.
The argument envp is an array of character pointers to null-terminated strings. These strings shall constitute the environment for the new process image. The envp array is terminated by a null pointer.
For those forms not containing an envp pointer ( execl(), execv(), execlp(), and execvp()), the environment for the new process image shall be taken from the external variable environ in the calling process.
The number of bytes available for the new process' combined argument and environment lists is {ARG_MAX}. It is implementation-defined whether null terminators, pointers, and/or any alignment bytes are included in this total.
File descriptors open in the calling process image shall remain open in the new process image, except for those whose close-on- exec flag FD_CLOEXEC is set. For those file descriptors that remain open, all attributes of the open file description remain unchanged. For any file descriptor that is closed for this reason, file locks are removed as a result of the close as described in close() . Locks that are not removed by closing of file descriptors remain unchanged.
If file descriptors 0, 1, and 2 would otherwise be closed after a successful call to one of the exec family of functions, and the new process image file has the set-user-ID or set-group-ID file mode bits set, and the ST_NOSUID bit is not set for the file system containing the new process image file, implementations may open an unspecified file for each of these file descriptors in the new process image.
Directory streams open in the calling process image shall be closed in the new process image.
The state of the floating-point environment in the new process image shall be set to the default.
The state of conversion descriptors and message catalog descriptors in the new process image is undefined. For the new process image, the equivalent of:
setlocale(LC_ALL, "C")
shall be executed at start-up.
Signals set to the default action (SIG_DFL) in the calling process image shall be set to the default action in the new process image. Except for SIGCHLD, signals set to be ignored (SIG_IGN) by the calling process image shall be set to be ignored by the new process image. Signals set to be caught by the calling process image shall be set to the default action in the new process image (see <signal.h>). If the SIGCHLD signal is set to be ignored by the calling process image, it is unspecified whether the SIGCHLD signal is set to be ignored or to the default action in the new process image. After a successful call to any of the exec functions, alternate signal stacks are not preserved and the SA_ONSTACK flag shall be cleared for all signals.
After a successful call to any of the exec functions, any functions previously registered by atexit() are no longer registered.
If the ST_NOSUID bit is set for the file system containing the new process image file, then the effective user ID, effective group ID, saved set-user-ID, and saved set-group-ID are unchanged in the new process image. Otherwise, if the set-user-ID mode bit of the new process image file is set, the effective user ID of the new process image shall be set to the user ID of the new process image file. Similarly, if the set-group-ID mode bit of the new process image file is set, the effective group ID of the new process image shall be set to the group ID of the new process image file. The real user ID, real group ID, and supplementary group IDs of the new process image shall remain the same as those of the calling process image. The effective user ID and effective group ID of the new process image shall be saved (as the saved set-user-ID and the saved set-group-ID) for use by setuid().
Any shared memory segments attached to the calling process image shall not be attached to the new process image.
Any named semaphores open in the calling process shall be closed as if by appropriate calls to sem_close().
Any blocks of typed memory that were mapped in the calling process are unmapped, as if munmap() was implicitly called to unmap them.
Memory locks established by the calling process via calls to mlockall() or mlock() shall be removed. If locked pages in the address space of the calling process are also mapped into the address spaces of other processes and are locked by those processes, the locks established by the other processes shall be unaffected by the call by this process to the exec function. If the exec function fails, the effect on memory locks is unspecified.
Memory mappings created in the process are unmapped before the address space is rebuilt for the new process image.
For the SCHED_FIFO and SCHED_RR scheduling policies, the policy and priority settings shall not be changed by a call to an exec function. For other scheduling policies, the policy and priority settings on exec are implementation-defined.
Per-process timers created by the calling process shall be deleted before replacing the current process image with the new process image.
All open message queue descriptors in the calling process shall be closed, as described in mq_close() .
Any outstanding asynchronous I/O operations may be canceled. Those asynchronous I/O operations that are not canceled shall complete as if the exec function had not yet occurred, but any associated signal notifications shall be suppressed. It is unspecified whether the exec function itself blocks awaiting such I/O completion. In no event, however, shall the new process image created by the exec function be affected by the presence of outstanding asynchronous I/O operations at the time the exec function is called. Whether any I/O is canceled, and which I/O may be canceled upon exec, is implementation-defined.
The new process image shall inherit the CPU-time clock of the calling process image. This inheritance means that the process CPU-time clock of the process being exec-ed shall not be reinitialized or altered as a result of the exec function other than to reflect the time spent by the process executing the exec function itself.
The initial value of the CPU-time clock of the initial thread of the new process image shall be set to zero.
If the calling process is being traced, the new process image shall continue to be traced into the same trace stream as the original process image, but the new process image shall not inherit the mapping of trace event names to trace event type identifiers that was defined by calls to the posix_trace_eventid_open() or the posix_trace_trid_eventid_open() functions in the calling process image.
If the calling process is a trace controller process, any trace streams that were created by the calling process shall be shut down as described in the posix_trace_shutdown() function.
The new process shall inherit at least the following attributes from the calling process image:
All other process attributes defined in this volume of IEEE Std 1003.1-2001 shall be the same in the new and old process images. The inheritance of process attributes not defined by this volume of IEEE Std 1003.1-2001 is implementation-defined.
A call to any exec function from a process with more than one thread shall result in all threads being terminated and the new executable image being loaded and executed. No destructor functions shall be called.
Upon successful completion, the exec functions shall mark for update the st_atime field of the file. If an exec function failed but was able to locate the process image file, whether the st_atime field is marked for update is unspecified. Should the exec function succeed, the process image file shall be considered to have been opened with open(). The corresponding close() shall be considered to occur at a time after this open, but before process termination or successful completion of a subsequent call to one of the exec functions, posix_spawn(), or posix_spawnp(). The argv[] and envp[] arrays of pointers and the strings to which those arrays point shall not be modified by a call to one of the exec functions, except as a consequence of replacing the process image.
The saved resource limits in the new process image are set to be a copy of the process' corresponding hard and soft limits.
If one of the exec functions returns to the calling process image, an error has occurred; the return value shall be -1, and errno shall be set to indicate the error.
The exec functions shall fail if:
The exec functions, except for execlp() and execvp(), shall fail if:
The exec functions may fail if:
The following sections are informative.
The following example executes the ls command, specifying the pathname of the executable ( /bin/ls) and using arguments supplied directly to the command to produce single-column output.
#include <unistd.h>
int ret;
...
ret = execl ("/bin/ls", "ls", "-1", (char *)0);
The following example is similar to Using execl() . In addition, it specifies the environment for the new process image using the env argument.
#include <unistd.h>
int ret;
char *env[] = { "HOME=/usr/home", "LOGNAME=home", (char *)0 };
...
ret = execle ("/bin/ls", "ls", "-l", (char *)0, env);
The following example searches for the location of the ls command among the directories specified by the PATH environment variable.
#include <unistd.h>
int ret;
...
ret = execlp ("ls", "ls", "-l", (char *)0);
The following example passes arguments to the ls command in the cmd array.
#include <unistd.h>
int ret;
char *cmd[] = { "ls", "-l", (char *)0 };
...
ret = execv ("/bin/ls", cmd);
The following example passes arguments to the ls command in the cmd array, and specifies the environment for the new process image using the env argument.
#include <unistd.h>
int ret;
char *cmd[] = { "ls", "-l", (char *)0 };
char *env[] = { "HOME=/usr/home", "LOGNAME=home", (char *)0 };
...
ret = execve ("/bin/ls", cmd, env);
The following example searches for the location of the ls command among the directories specified by the PATH environment variable, and passes arguments to the ls command in the cmd array.
#include <unistd.h>
int ret;
char *cmd[] = { "ls", "-l", (char *)0 };
...
ret = execvp ("ls", cmd);
As the state of conversion descriptors and message catalog descriptors in the new process image is undefined, conforming applications should not rely on their use and should close them prior to calling one of the exec functions.
Applications that require other than the default POSIX locale should call setlocale() with the appropriate parameters to establish the locale of the new process.
The environ array should not be accessed directly by the application.
Applications should not depend on file descriptors 0, 1, and 2 being closed after an exec. A future version may allow these file descriptors to be automatically opened for any process.
Early proposals required that the value of argc passed to main() be "one or greater". This was driven by the same requirement in drafts of the ISO C standard. In fact, historical implementations have passed a value of zero when no arguments are supplied to the caller of the exec functions. This requirement was removed from the ISO C standard and subsequently removed from this volume of IEEE Std 1003.1-2001 as well. The wording, in particular the use of the word should, requires a Strictly Conforming POSIX Application to pass at least one argument to the exec function, thus guaranteeing that argc be one or greater when invoked by such an application. In fact, this is good practice, since many existing applications reference argv[0] without first checking the value of argc.
The requirement on a Strictly Conforming POSIX Application also states that the value passed as the first argument be a filename associated with the process being started. Although some existing applications pass a pathname rather than a filename in some circumstances, a filename is more generally useful, since the common usage of argv[0] is in printing diagnostics. In some cases the filename passed is not the actual filename of the file; for example, many implementations of the login utility use a convention of prefixing a hyphen ( '-' ) to the actual filename, which indicates to the command interpreter being invoked that it is a "login shell".
Historically there have been two ways that implementations can exec shell scripts.
One common historical implementation is that the execl(), execv(), execle(), and execve() functions return an [ENOEXEC] error for any file not recognizable as executable, including a shell script. When the execlp() and execvp() functions encounter such a file, they assume the file to be a shell script and invoke a known command interpreter to interpret such files. This is now required by IEEE Std 1003.1-2001. These implementations of execvp() and execlp() only give the [ENOEXEC] error in the rare case of a problem with the command interpreter's executable file. Because of these implementations, the [ENOEXEC] error is not mentioned for execlp() or execvp(), although implementations can still give it.
Another way that some historical implementations handle shell scripts is by recognizing the first two bytes of the file as the character string "#!" and using the remainder of the first line of the file as the name of the command interpreter to execute.
One potential source of confusion noted by the standard developers is over how the contents of a process image file affect the behavior of the exec family of functions. The following is a description of the actions taken:
Applications that do not require to access their arguments may use the form:
main(void)
Some implementations provide a third argument to main() called envp. This is defined as a pointer to the environment. The ISO C standard specifies invoking main() with two arguments, so implementations must support applications written this way. Since this volume of IEEE Std 1003.1-2001 defines the global variable environ, which is also provided by historical implementations and can be used anywhere that envp could be used, there is no functional need for the envp argument. Applications should use the getenv() function rather than accessing the environment directly via either envp or environ. Implementations are required to support the two-argument calling sequence, but this does not prohibit an implementation from supporting envp as an optional third argument.
This volume of IEEE Std 1003.1-2001 specifies that signals set to SIG_IGN remain set to SIG_IGN, and that the process signal mask be unchanged across an exec. This is consistent with historical implementations, and it permits some useful functionality, such as the nohup command. However, it should be noted that many existing applications wrongly assume that they start with certain signals set to the default action and/or unblocked. In particular, applications written with a simpler signal model that does not include blocking of signals, such as the one in the ISO C standard, may not behave properly if invoked with some signals blocked. Therefore, it is best not to block or ignore signals across execs without explicit reason to do so, and especially not to block signals across execs of arbitrary (not closely co-operating) programs.
The exec functions always save the value of the effective user ID and effective group ID of the process at the completion of the exec, whether or not the set-user-ID or the set-group-ID bit of the process image file is set.
The statement about argv[] and envp[] being constants is included to make explicit to future writers of language bindings that these objects are completely constant. Due to a limitation of the ISO C standard, it is not possible to state that idea in standard C. Specifying two levels of const- qualification for the argv[] and envp[] parameters for the exec functions may seem to be the natural choice, given that these functions do not modify either the array of pointers or the characters to which the function points, but this would disallow existing correct code. Instead, only the array of pointers is noted as constant. The table of assignment compatibility for dst= src derived from the ISO C standard summarizes the compatibility:
| dst: | char *[] | const char *[] | char *const[] | const char *const[] | |||
| src: | |||||||
| char *[] | VALID | - | VALID | - | |||
| const char *[] | - | VALID | - | VALID | |||
| char * const [] | - | - | VALID | - | |||
| const char *const[] | - | - | - | VALID |
Since all existing code has a source type matching the first row, the column that gives the most valid combinations is the third column. The only other possibility is the fourth column, but using it would require a cast on the argv or envp arguments. It is unfortunate that the fourth column cannot be used, because the declaration a non-expert would naturally use would be that in the second row.
The ISO C standard and this volume of IEEE Std 1003.1-2001 do not conflict on the use of environ, but some historical implementations of environ may cause a conflict. As long as environ is treated in the same way as an entry point (for example, fork()), it conforms to both standards. A library can contain fork(), but if there is a user-provided fork(), that fork() is given precedence and no problem ensues. The situation is similar for environ: the definition in this volume of IEEE Std 1003.1-2001 is to be used if there is no user-provided environ to take precedence. At least three implementations are known to exist that solve this problem.
Other systems (such as System V) may return [EINTR] from exec. This is not addressed by this volume of IEEE Std 1003.1-2001, but implementations may have a window between the call to exec and the time that a signal could cause one of the exec calls to return with [EINTR].
An explicit statement regarding the floating-point environment (as defined in the <fenv.h> header) was added to make it clear that the floating-point environment is set to its default when a call to one of the exec functions succeeds. The requirements for inheritance or setting to the default for other process and thread start-up functions is covered by more generic statements in their descriptions and can be summarized as follows:
alarm() , atexit() , chmod() , close() , exit() , fcntl() , fork() , fstatvfs() , getenv() , getitimer() , getrlimit() , mmap() , nice() , posix_spawn() , posix_trace_eventid_open() , posix_trace_shutdown() , posix_trace_trid_eventid_open() , putenv() , semop() , setlocale() , shmat() , sigaction() , sigaltstack() , sigpending() , sigprocmask() , system() , times() , ulimit() , umask() , the Base Definitions volume of IEEE Std 1003.1-2001, Chapter 11, General Terminal Interface, <unistd.h>